I

Isotope laboratory. L. to r.: electronics engineer Vladislav Eganov, PhD student Hripsime Mkrtchyan, YerPhI’s Medical Isotope Laboratory leader Dr. Albert Avedisyan, scientist Rupen Dalakian


YEREVAN—The International Atomic Energy Agency (IAEA) has indicated its support for the Technetium 99m Medical Isotope Production Project at the newly formed Medical Isotope Production Division of the Yerevan Physics Institute (YerPhI). The research and production program will use an 18 MeV (million electron-volt) proton beam of an IBAC18 cyclotron particle accelerator to be installed at a newly renovated facility of the physics institute by the end of 2014. The Technetium is produced by irradiating Molybdenum with a proton beam from the cyclotron.

Technetium (99mTe) is the most widely used isotope for medical imaging today with over 30 million diagnostic medical imaging scans every year world-wide. When injected into patients it produces radiation similar to x-rays which are used to image internal organs. This isotope has a half-life of 6 hours, meaning that half of the remaining isotope decays every 6 hours. Thus 94% of the Technetium injected into a patient decays within 24 hours resulting in minimal radiation exposure. Exposure is about the same as from an x-ray.

Gevorg Harutunyan performing isotope analysis on gamma ray scanner

According to the Scientific Center of Radiation Medicine and Burns, Armenian Ministry of Health, the need in Armenia for the isotope 99mTe is 5,000 doses per year. Due to its rapid decay, and due to the fact that currently this isotope must be shipped from abroad, there is in Armenia only enough of this isotope to treat 1,000 patients per year. Thus 80% of Armenian patients have no access to this medical imaging technology. There is, in Armenia, a need for a non-stop supply of the isotope 99mTe.

The goal of the Isotope Production Division of the Yerevan Physics Institute is to develop the technology of direct 99mTe production in order to cover the need of Armenian clinics and their patients. Senior scientists at the Yerevan Physics Institute, together with recent physics and engineering graduates and graduate students are preparing the facilities for the manufacture, purification, and testing of this isotope in a newly equipped laboratory at the institute’s facilities in Yerevan. Special efforts are being implemented to assure quality and safety. This project is one of many bringing the benefits of science to the Armenian public.

Sourcehttp://asbarez.com/124583/iaea-supports-medical-isotope-production-in-armenia/